OneDios People OneDios Talks

10 Easy Tips to Keep Your Water Heater in Pristine Condition

geyser repair

The vast majority agree that having access to hot water is unquestionably one of the essential things in any house. Because of this need of the hour, it is crucial to schedule timely quality checks on your water heater.

As we say, prevention is better than cure. The same goes for electrical appliances also. The good news is that by doing small preventative maintenance tasks, you will be able to extend the life of the systems and save money on water heater repair.

Following these simple tips for water heater maintenance and installation, you could ensure hot water in your house for a considerable amount of time.

1.   Know your Water Heater and Keep it Accessible

You should know which type of water heater you have installed in your home. The capacity and kind of geyser you want or have are often printed on the label affixed to the tank.

The sticker also contains information about the warranty period of your geyser.

Is the guarantee on the water heater no longer valid? This indicates that you need more regular checks for malfunction, and also consider booking a service from OneDios to keep a check on any unexpected geyser repair. In addition, OneDios simplifies your search for customer care as you won’t have to look for the number of Blue Star customer care or any other brand.

For easy maintenance, keep your water heater system accessible. Take care not to keep anything within 2 feet distance of your geyser. It is also essential to get it installed at a place with sufficient height. Also, ensure space between the water heater and the wall. For a technician to be able to service it or repair it correctly, the geyser should have sufficient wriggle room.

2.  Keep The Temperature Low to Save Electricity

Maintaining a temperature of 120 degrees Fahrenheit to eradicate the vast majority of pathogens is a good thumb rule. The hotter your hot water supply is, the more energy it will consume. You can adjust this setting by turning your water heaters thermostat up or down. This simple geyser maintenance tip can save you money and electricity both. Use a flathead screwdriver to adjust the temperature.

If you keep the temperature low enough to be manageable, you won’t have to consult the Bajaj electricals customer care for geyser repair.

3.  Check on TPR Valve

A water heater can blow up if an unsafe internal pressure is allowed to build up in the system. Because of this, manufacturers equip water heaters with a safety valve often known as temperature pressure relief (TPR). This valve releases pressure from the tank if it detects that it has reached an unsafe level. Test the TPR valve regularly to ensure it is operating as required.

4.  Conduct Test on Anode Rod

An Anode rod is placed inside your water heater tank to attract rust and impurities that would otherwise build up inside the tank and rust it away.

Anode rod needs to be replaced as it eventually degrades or becomes worn out with time. The rod must also be replaced if it becomes coated with whitish calcium sediments or its thickness has reduced nearly to half an inch. Because of this, it is recommended to check the condition of the anode rod at least once every three years, and save your time by calling the Blue Star water dispenser service centre.

5.  Flush the Water Heater Yearly

Yearly draining of the water heater is significant. As it allows you to clean the interior of the tank and sediment can also be easily removed. This will prevent the water heater from working too hard, extending its lifespan and lowering your monthly energy cost. In addition, as we know, higher temperatures encourage the accumulation of silt. It is recommended that the temperature of your water heater should be 120 degrees or lower.

6.  Insulate The Pipes

Insulating the water heater tank is just like insulating the walls or roof of your home. It is a simple and affordable approach to enhancing the energy efficiency of your water heater and saving money. Insulation may cut heat loss by as much as 45% and your expenditures for overheating the water.

If your water heater is recently purchased, it must be already insulated. However, if it is an older type, you should consider replacing the insulation with a new one with an R-value of at least 24. If unsure, you may test the degree of insulation by touching the water heater; if it is warm to the touch, the water heater needs further insulation. Purchase foam pipe insulation from a hardware store and wrap each pipe with it before connecting it to the hot water tank.

7.  Check on the Plug

Your switch will frequently ignite if you use a cable with a limited power supply. The greater electrical wattage and power fluctuations will cause the plug and the pins to heat up, leaving burn marks on both the plug and the pins. To prevent any electrical short circuits because of this, use plugs and sockets that are new. Also, try using the MCB switch instead of the regular one.

8.  Replace the Plastic Inlet-Outlet Pipes with Metal Pipes

The use of metal inlet and outlet pipes are highly recommended as they are more resistant to heat than the plastic ones that come with a geyser. In addition to that, don’t forget to inspect the joints frequently. It is time to repair or replace the inlet and outlet water pipes if you see white deposits around the joints caused by hard water or corrosion.

9.  Switch Off Regularly

It is advisable not to keep the geyser on for extended periods, as it would reduce the water heater’s life. Therefore, it makes far more sense to turn it on only five minutes before you need it rather than thirty minutes in advance. Your geyser’s lifespan can be significantly increased with routine servicing and upkeep.

10. Yearly Maintenance

Lastly, for the water heater’s safety, you should always get a professional. If you have no experience in the maintenance of a geyser and want to avoid water heater problems, then it is better to book an expert from OneDios to do the job. Our trained team is equipped to perform basic geyser service regularly and can help extend the life of your water heater. This is especially true if you want to save water heater repair costs. They can also assist you in the Blue Star AC service request.

The Upshot

Maintenance on your water heater may not be everyone’s idea of a good time, but it can significantly extend the life of your appliance. It is best that expert technicians service or repair your geyser so that it lasts longer.