Select Service

Inalsa - Popcorn Maker

Inalsa - Popcorn Maker

Inalsa

Select Issue

Inalsa Popcorn Maker Service

You can make excellent and fresh popcorn quickly with the Inalsa Popcorn Maker. The Inalsa Popcorn Maker service team has a reputation for providing high-quality, easy-to-use, and cost-effective home appliances, as well as excellent after-sales support. It uses air instead of oil to make hot, fluffy popcorn. By plugging it in, putting kernels on top, and placing a bowl beneath it, you can make tastier, crispier, and also healthier popcorn in just a few simple steps.

At home, you may enjoy the convenience, fun, and flavor of theatre popcorn. If you enjoy popcorn and movie nights with friends, the popcorn maker is without a doubt one of the most helpful kitchen items. This enjoyment can be crushed if the Inalsa popcorn maker starts giving you trouble. If you are facing any issues with your popcorn maker, you can contact the Inalsa Popcorn Maker service team for repair work. You can also book a service call for your Inalsa products on the OneDios app in less than 30 seconds.

Repair Request

1. Airflow problem

Heat can escape through the ventilation holes. Please contact the Inalsa Popcorn Maker customer support team to resolve the issue.

2. Bad Smell

If the device emits a burning smell, there may be too many kernels in the container, which will result in overcooking. Turn the device off, raise the lid, and gently remove any remaining kernels from the housing.

3. Body broken

When parts are ordered or delivered, many are on the point of breaking or are already broken. If you received a new popcorn maker in damaged condition, please contact the Inalsa Popcorn Maker service team.

4. Body melted

For a variety of reasons, the body of your popcorn maker may show indications of wear and tear. You can fix this issue by contacting Inalsa Popcorn Maker customer care if you are facing this problem.

5. Color peel off

Any damage caused by chipping, peeling, flaking, or denting should be handled by the Inalsa Popcorn Maker service team.

6. Dented

Normal wear and tear on your popcorn maker includes rust spots, scratches, and dents. Please contact the Inalsa Popcorn Maker service team if your appliance is breaking apart and has many dents.

7. Disbalance

Overloading the kettle results in uneven heating. This will prevent the machine from maintaining a high enough temperature during use.

8. Display not working

Please contact the Inalsa Popcorn maker customer care if there is an issue with the appliance.

9. Does not operate

If it does not work, you can disconnect the popcorn maker, remove the lid, and empty the popping chamber of popped and unpopped kernels. Look over the chamber's bottom and sidewalls. Check out the Popping Chamber base and shaft replacement guides if there is any sign of build-up in the popping chamber. If there is an issue with your appliance, please contact the Inalsa Popcorn Maker service team.

10. Glass broken

Test the heating element if the machine does not heat. Replace the popcorn maker if the element is broken. If the stir rod on an oil popper does not stir, check the motor and repair it if it is broken, or replace the popcorn maker. If any of your appliance's parts are broken, please contact the Inalsa Popcorn Maker service team.

11. Electric Shock

Do not immerse the cord, plugs, or device in water or any other liquid to avoid an electric shock. If your appliance is giving you an electric shock, please contact the Inalsa Popcorn Maker customer care number.

12. Heating problem

A fault in the heating element is most likely the cause of your popcorn machine's failure to heat up. You may fix the issue by calling the Inalsa Popcorn Maker customer care number.

13. Jammed

Make sure you have not overloaded the popping chamber if the popcorn maker becomes jammed regularly while in use. Tilt the maker forward slightly during the popping process to keep the corn from leaving properly and the chute from clogging. If this is the case, you need to contact the Inalsa Popcorn Maker service team or the Inalsa Popcorn Maker customer care number.

14. Jar broken

If the popcorn outlet has broken, please contact the Inalsa Popcorn Maker customer service team to address the issue.

15. Knob issues

If the switch on the popcorn maker is broken, please contact the Inalsa Popcorn Maker service team.

16. Leakage

The screw component that secures the revolving popping wire was sometimes installed incorrectly, resulting in a gap on one side of the screw. As a result, the popcorn maker began to leak popping oil from the bottom. To fix this issue, please contact the Inalsa Popcorn Maker customer care number.

17. Lock problem

Before cleaning, make sure the switch is in the "OFF" position and the power cable is disconnected from the electric outlet. Please contact the Inalsa Popcorn Maker service team if there is an issue with the "OFF" switch.

18. Missing part

Many parts are on the verge of breaking or are already broken when purchased or delivered. Please contact the Inalsa Popcorn Maker service team if you received the new popcorn maker with missing parts.

19. Noise problem

If the device is producing unusual grinding sounds. It would be better to repair any loose parts in the popcorn maker. It is better to call the Inalsa Popcorn Maker service team and fix it.

20. Other Symptoms

The most common Popcorn Maker problems include the machine not heating up, some parts being clogged, and other concerns. If you have any problems with your appliance, please contact the Inalsa Popcorn Maker service team.

21. Packing damage

If the new popcorn maker you purchased was damaged when it arrived at your house. Please contact Inalsa Popcorn Maker customer service to resolve the issue.

22. Sometimes, it stops

The popper was working properly until it suddenly stopped. Overheating might be the culprit, which is caused by filling the popping chamber over the kernel level indicated within the chamber. Another reason might be that the power cord was disconnected unexpectedly. If this happens, simply connect the device to an appropriate socket. If there is an issue, you should call the Inalsa Popcorn Maker service team to fix it.

23. Stops immediately

The popper was working fine, then it abruptly stopped working. Overheating, which is produced by filling the popping chamber over the kernel level specified within the chamber, might also be the cause.

24. Wire problem

If the popcorn maker is connected to the correct outlet but is not responding, check the power wire for any visible damage. You will need to replace the power cord if there is any visible damage. You should contact Inalsa Popcorn Maker customer care to fix this issue.

25. Wrong parameter display

Please contact the Inalsa Popcorn maker customer care if you have an issue with your appliance.

Installation Related

1. Demo Request

For some people, learning how to operate a popcorn maker for the first time may be hard. As a result, it is best to schedule a demo with a technician. By calling the Inalsa Popcorn Maker customer care number, you may easily create a service request.

2. Installation Request

If this is your first time buying the popcorn maker, please read the instructions carefully to make the most of your investment. Make a note of these instructions and store them safely in case you need them again. If you follow the necessary precautions, you may easily use the popcorn maker on your own. If you have any more concerns about your new appliance, please call the Inalsa Popcorn Maker customer care number.

FAQ:

Q1. The popcorn that I make on the stove becomes soggy. What is the best way to create crispy popcorn?

When a kernel of popcorn bursts, moisture escapes, and steam is produced. Use a vented or loose-fitting cover to allow moisture to escape instead of resting back on the popped kernels, resulting in crispy popcorn.

Q2. What is the average lifespan of a popcorn machine?

A popcorn maker may last up to ten years if you service it properly.

Q3. How long does it take a popcorn machine to heat up?

It will take around 5-7 minutes for your popcorn machine's kettle to heat up and be ready to pop.